ZiWSz v.1 - LED Locker Display

Display characteristics

  • Four digits
  • Independent communication via RS485
  • MKEiA communication protocol
  • Displaying locker number and time
  • Digit height 25mm
  • Milled case made of HPL
  • Simple mounting
  • Power supply 8V-30V (50mA 12V)
  • Protection IP55
  • Operation temperature from 0°C to 40°C
  • Dimensions 120x60x10mm

Download:





ZiWSz is LED display, design to show locker/cabinet number or the current time. The display is made of discrete LED SMD diodes in order to assure appropriate contrast at the low power consumption. Communication with the display is done by RS485 interface and MKEiA protocol, which allow to apply simple cable connection and service. On the other case side, there is detachable four pin connector used for power supply and communication. The case of the display is milled from durable HPL laminate composite. Dimension of ZiWSz (10mm thickness) allows to easy integrate with lockers/cabinet or can be placed on the other side of cabinet wall. Our company provides wide colors spectrum of the device. Mounting the device to the locker face or on the wall can be easily done by four stainless screws at the front. Moreover, the case is equipped on the back with a seal which help preventing water to get inside. The device can be supplied in wide voltage range from 8V to 30V. To provide supply and communication, typical UTP/FTP cable can be used. ZiWSz display with other devices such as electric lock power controller BxOut40, SCKD RFID reader and PSZS software can provide the whole necessary equipment and software to built central management locker/cabinet system, which can be used in different places such as public swimming pools, workplaces or schools.