Devices  
   
     
  BxLCD v.1 - Programmable twenty ports controller RFID Unique  
 
   
Controller characteristics:
  • Operation with Unique tag on EM-4102
  • Twenty outputs up to 1A electro-lockers
  • Programming with PC through USB
  • Programming by tags
  • Four levels of authorization identity tags
  • MASTER, SERVICE, PROTECTOR and USER
  • Power supply 12V-24V 200mA
  • Operation temperature 0°C-40°C
Zmień język
Ask for price and availability: info@mkeia.com
  
Schematic Zoom Manual

Operation with Unique tag on EM-4102 Twenty outputs up to 1A electro-lockers Programming with PC through USB Programming by tags Four levels of authorization identity tags MASTER, SERVICE, PROTECTOR and USER Power supply 12V-24V 200mA Operation temperature 0°C-40°C BxLCD is a proximity reader to touch-free open the swimming pool or work lockers. The heart of the controller is ATMega8 microcontroller which decodes the data from proximity tags Unique (compatible with EM-410) using the receiving chip U2270. Programming is through tags MASTER and SERVICE or by using the PC application. The software allows to program all types of tags and to allocate the numbers of the lockers. Communication with PC is by USB interface - virtual serial port. The tag of MASTER type is to program the SERVICE tags and to delete earlier-programmed tags kept in non-transitory EEPROM memory. MASTER tag is for service or for person who is responsible for the building maintenance. Programming of the MASTER type tag is by the PC software. SERVICE tag is to open all the lockers (electromagnetic lockers) and to program USER type tags. The controller allows to program two different MASTER type tags, up to seven different SERVICE type tags and three PROTECTOR tags. USER type tag enables to open one of twenty lockers which was earlier programmed (by using SERVICE tag or by software). PROTECTOR tag allows to open earlier allocated lockers by PC software. LED display on the front panel of the case informs about the number of the open locker. LCD display is particularly useful during programming process and its function is to display the work mode of the device. The whole system is in plastic case 198x144x53. The maximum load of the output shouldn’t be over 1A and the sum of all output currents shouldn’t be over 10A. Setting output is by putting its potential to ground - that is the locker electromagnet should be connected between + power supply and the controller output. The device is produced exclusively for BxSystem with office in Rzeszow. This company sells and introduces electronic customer service systems ESOK.

 
   
 
      info@mkeia.com